Core features:
Heavy duty steel cargo body with drop sides, reinforced frame and sub-frameHydraulic outriggers with extendable beams and stabiliser legs10 ton hydraulic straight boom crane with multi-section telescopic extension with hook (safety latch) or grab or winch (model dependent)Overload protection, load holding valves and pressure relief valvesReflective markings and warning beaconsWork lights (model dependent)Options: Custom paint, rotator, hook (with safety latch), winch, side tool boxes (model dependent).
25 Ton Hiab with 10 Ton Straight Boom Crane:
Specifications are for different makes of truck, different type of body, and different models of crane. The following table lists some typical values. Please get in touch to get the exact datasheet of your configurations.Specification Typical Value-Truck class 25 ton Payload class-Crane type Hydraulic Tringle (straight) boom-Crane capacity 10 tons at short radius-height (Travel) 3500mm-4000mm-Width 2450mm-2550mm-Length (overall) 9500mm-12500mm-Cargo Body length 7000mm-9500mm-Weight (kerb with crane) 13500kgs-19500kgs-boom reach (Maximum) 12m-20m (according to sections)-Slewing angle 360 degree continuous or 400 degree-Outriggers extendable Hydraulic beam-finish Primer Anti-corrosion coat and Paint
Cross Section
Maintaining a strong and stable structure under load conditions, the cross section of the crane and chassis illustrates:Chassis and sub-frame: A reinforced steel structure which supports the crane base and distributes its lifting strength along the truck.Crane base, slewing ring - heavy duty piece to rotate the boom smoothly round 360 degrees.Telescopic boom sections: nested high strength steel sections which usually form boxes and move only in a straight line without bending.Hydraulic cylinders and valves: raise, extend and slew the boom, load holding valves will hold the load in place if pressure is lost.
Outriggers:
Stabiliser legs which extend to increase the base for stabilization during lifting operations and will prevent tipping. This layering provides controlled lifting and stability for the operator, the carrier and the load.
Lifting Details
This 10-ton rating is at a determined radius and boom length. The further out towards the boom the load must be less, and load charts are always supplied with the unit.Max capacity is 10000kg at close radius and less at full extension.Load chart: a clear chart which indicates the maximum load or safe capacity of the boom at each length and angle.Use of outriggers: always use outriggers, and make sure to level them on solid ground prior to lift.Hydraulic system: smooth and proportional control to accurately position heavy loads.Safety systems: overload protection and pressure relief valves and hook safety latches.Operator controls: remote or lever controls located where they can be clearly seen by the operator.Safety note: operating the crane should only be performed by trained and certified operators. Do not exceed the rated load at any time.The 25 Ton Hiab and 10 Ton straight boom crane is a machine that is suitable for a number of industries.